UltiMill - The Ultimate Grain Mill

If you have a large homestead and need a bit more than a small roller mill for to process your grains before feeding to the animals, or you aspire to build the ultimate homebrewery then you should really consider this Ultimate Grain Roller/flaker Mill. With a stainless construction, 60lb grain hopper with lid, fully adjustable hardened steel rollers, and explosion proof motor this is the top-of-the-line grain mill for homebrewers and a great choice for a nano brewery.

This item will ship via TRUCK please call to get a shipping quote BEFORE you order.  

The all stainless hopper holds a sack of grain or malted grain. The included stainless lid keeps dust down and keeps your hopper clean for your next batch. The mill body itself is also made from stainless steel while the 2" diameter rollers are made from hardened steel for longevity. The rollers adjust on both sides providing for a consistent, even gap the length of the rollers. The rollers are knurled in a pattern that we have found over the years to deliver a great crush and consistent feed.

We use an explosion proof motor, found on commercial mills, because grain dust can ignite if a regular electric motor was to emit a spark. It is a measure of safety to give you and your family peace of mind.  The switch on this unit has been upgraded with a sturdy cover, to further diminish the chance of sparking.

The stainless stand allows for a six gallon reception bucket to be slid under to collect cracked grain. Since grain dust is to be avoided in a brewery we make the bucket-to-stand fit perfectly tight to reduce dust in your brewery. A six gallon bucket will hold 25 pounds of grain, which we have found is a manageable size to lift. For larger batches you can mill into one bucket, turn off the mill, and continue milling into the next bucket.

Features

• 60 pound capacity stainless hopper with lid
• Stainless mill body
• 2" Fully Adjustable hardened steel rollers (Gap range of 0.011 - 0.093 inches)
• Stainless stand
• 1/3 hp explosion proof motor with on/off switch
• 110v Motor pulls 6.6 Amps
• 38"H x 27"L x 16"W
• 15 lbs per minute throughput

Please note: The UltiMill now features a finger guard inside the hopper near the rollers. It is a simple welded-in-place bar that will not affect grain being fed into the mill but may affect larger materials if the mill is being used for something other than brewing malt.

Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.

Shipping Limitation: This item ships freight only, we will call you with shipping quote.